Create / Delete Batches

Create a Disk Batch

Disk batches are created using the Batch Control toolbox.

Note:

If you can't find the Batch Control toolbox make sure that you have a proper View activated. To do this navigate to the file menu bar and click View > Windows > Batch Control. There should be a check mark next to the Batch Control View.

In the Batch Control toolbox click New Batch. This will open the Create a New Batch configuration wizard. After configuring batch settings click Finish and the new batch will appear in the Batch Control window.

Figure 1: Batch Control Toolbox

Adding disks to a Disk Batch

Disk Bays can be added to Batches in several ways:

  • From Disk Bays View
  • From Edit menu

Read Add Disks to Batches for more information.

Removing disks from a Disk Batch

Disks are removed from a Batch in a very similar way to the way they are attached. Follow the same steps as with Adding Disks but select bays that are attached to batches and choose the Detach Bays command.

Deleting Batches

Batches can be deleted by selecting the batch in the Batch Control toolbar and choosing the Delete Batch or Remove All commands.

Edit batch attributes

Batch attributes can be edited at any time after batch created. See: Edit Batch Attributes

Note:

Disk batch attributes changed every time if altered in confirmation dialog.